All About Powerwash Daily

What You Need To Know Before You Break Out The Hose For Spring Cleaning

Sep 1

Pressure washing is a fast and effective way to get your driveway clean from debris and mold. Follow these simple tips to ensure your success. Start with low pressure around 18 inches away from the dirt surface to start. Moving in a side-by-side motion against the dirt surface at an angle.

 

Always use the same nozzles. Pressure washing machines have separate nozzles that are specially made for each different kind of dirt. Do not switch nozzles on or off based upon the type of dirt. Moving in an overlapping pattern keeps you from inflicting too much damage to the ground.

 

Use a wand to apply the photo 7 agent. Press the wand directly onto the dirt. You can use a rotary tool or your bare hand to spread the photo 7 agent all over the exterior of the home, driveway and even deck and patio areas.

 

The most important part of this step is to make sure that the wand is at an angle to that of the sun. This keeps the photo 9 from drying out and becoming discolored. To avoid damage from the sun, you may want to have a second wand set aside just in case the first one becomes damaged. It is best to set the second wand on a timer to ensure that it is not exposed to direct sunlight for too long.

 

Make sure to check the nozzles to make sure they are clear of any dirt. If you see any debris clogging the nozzles, they will be necessary to be replaced. There are many types of cleaners that have higher levels of pressure than others. Be sure to follow the instructions included with the nozzles to prevent any damage from occurring to your pressure washer.

 

Once you have cleaned the nozzles and let them dry, apply a coat of primer to the exterior of the home as well as the areas where you did not get all of the dirt. This will help give your surface cleaner protection. Then allow the primer to dry thoroughly before applying the final coat of paint. Pressure washing is a very easy and effective process.

 

The first tip when performing a pressure wash is to prepare the siding before you start washing it. Washing siding before painting it can help you avoid having to strip away the protective coating on the surface. Remove the debris that lies between the shingles using a pressure washer. The debris will provide an area for paint to flow and get into the paint. Washing the siding before painting will also help cut down on paint streaks. The overall result will be a cleaner look with less scrubbing.

 

Another useful pressure washing tip is to start at one corner and work your way across the entire length of the house. Use a wand that is at least four inches long to perform this task. Start at the top of the walls and slowly work your way to the bottom. If your walls have trim around the edge, use the wand's long handle to push along the trim and continue along until the wall is reached. This will avoid streaks on the trim. It will also prevent the possibility of paint streaks.

 

In order to maximize the cleaning power, always clean the area that you are going to be cleaning with the same type of cleaner and soap that you will be using when you perform the pressure washing task. You should always follow the directions that come with the product to ensure that you get the best results. If you fail to follow these instructions, you will not get the results that you want. To maximize your cleaning success, always rinse off any residue from the cleaning solution before beginning the process again.